Advanced
Character Edit
With this setting, you can enter a custom name for each input source. When the input source is selected, its name will appear on the display.
1 | RECEIVER | Press the [RECEIVER] REMOTE | |
MODE button, followed by the | |||
|
|
[SETUP] button.
The main menu appears onscreen.
2 | Use the Up and Down [ ]/[ ] |
| buttons to select “4. Input Setup,” |
5
ENTER
ENTER
Press the Down [ | ] button to |
select “Character,” and then | |
press the Right [ | ] button to |
open the character input screen.
b.Character
:
ABCDEFGHIJKLM
NOPQRSTUVWXYZ
abcdefghijklm nopqrstuvwxyz
[Exit]
| and then press [ENTER]. |
ENTER | The Input Setup menu appears. |
| |
| 4.Input Setup |
| |
| 1.Delay |
| 2.Character Edit |
ENTER |
|
3 |
| Use the Up and Down [ ]/[ ] |
|
| buttons to select “Character |
|
| Edit,” and then press [ENTER]. |
| ENTER | The Character Edit menu appears. |
|
| |
|
| |
|
| |
|
| a.Character Display |
| ENTER | :Yes |
| b.Character | |
|
| |
|
| : |
|
| Press to Edit |
|
| to Clear |
6 | Use the arrow [ ]/[ ]/[ ]/[ ] |
| buttons to select a character, and |
ENTER | then press [ENTER]. |
ENTER
7 | Repeat step 6 to enter up to 10 |
| |
| characters. |
| If you enter a character by mistake: |
| Press the [RETURN] button to move |
| the cursor back one place. |
To correct a character:
1.Press the [ENTER] or [RETURN] button repeatedly to select the char- acter to be corrected.
2. Use the Left and Right []/[ ] buttons to select the new character, and then press [ENTER].
4
ENTER
ENTER
Use the Up and Down [ ]/[ ] buttons to select “Character Dis- play,” and use the Left and Right []/[ ] buttons to select:
No (Default): The default name is displayed.
Yes: The custom name is displayed.
This setting determines if the default name or the custom name you enter is displayed when the input source is selected.
If the name contains less than 10 char- acters, select “Exit,” and then press [ENTER].
8 | Press the [SETUP] button. |
| |
| Setup closes. |
To delete all the characters in a name:
In step 5, press the Left [] button instead of the Right [ ] button.
Notes:
•When the multichannel input is selected, the same name as for DVD is displayed.
•This procedure can also be performed on the AV receiver by using its [SETUP] button, arrow buttons, and [ENTER] button.
77