Service Mode
The following baud rates are available :
-9600
-4800
-2400
-1200
-600
-300
-150
-75
The actual baud rate will be highlighted. To change the baud rate, push the control disk up or down and press ENTER to accept the new baud rate setting.
Reset Lamp Runtime
Reset lamp run time is only allowed when a new lamp is installed. Highlight Reset Lamp Run Time by pushing the control disk up or down and press ENTER to select.
When Reset Lamp Run Time is selected in the Service Mode selection menu, the following warning will be displayed :
Risk of electrical shock. Reset lamp run time is reserved to qualified service personnel.
If you are not qualified, press EXIT to cancel the reset operation.
5975288 BARCOGRAPHICS 8200 110497
CHANGE BAUDRATE PC | |
9600 |
|
4800 |
|
2400 |
|
1200 |
|
600 |
|
300 |
|
150 |
|
75 |
|
Select with | or |
<ENTER> to accept | |
<EXIT> to return. | |
SERVICE |
IDENTIFICATION |
CHANGE PASSWORD |
CHANGE LANGUAGE |
CHANGE PROJ. ADDRESS |
CHANGE BAUDRATE PC |
RESET LAMP RUNTIME |
LAMP RUNTINE HISTORY |
MORE |
WARNING |
RISK OF |
ELECTRICAL SHOCK |
______________________________________________________________ |
LAMP RESET RUN TIME |
is reserved to |
qualified |
service personnel |
<ENTER> to accept |
<EXIT> to return. |
