Barco R9001330 owner manual Convergence and press ENTER to, Green focusing, Installation

			Installation
To adjust the convergence, there are test patterns provided in the
convergence menu.		CONVERGENCE
Use the control disk to hightlight	Convergence and press ENTER to	GREEN
		BLUE ON GREEN
display the Convergence menu.
		RED ON GREEN
Start with the Green test pattern and continue with the Red on green		HATCH
and finish with the Blue on green.
Use the control disk to select Green and press ENTER to display the		Select with	or
green pattern.
		then <ENTER>
		<EXIT> to return.
The pattern shows lines of one pixel.
Near six lines on the displayed pattern, a screw is drawn with a			4
number next to it (e.g. if displayed in green = corresponding with the
screws and numbers on the green LCD panel).
When turning a screw in the direction marked by the arrow above the			1
displayed screw on the screen, the line on the screen moves in the
direction of the straight arrow.
Green focusing		6	5
		3	2

a. Adjust the projection lens until optimal focus for the lines 5 and 6 is obtained (hint : use the focusing marker lines next to the indicated points)

b. Turn screw 4 for optimal focus of the corresponding green line 4 on the screen.

c. Turn screw 5 for optimal focus of the corresponding green line 5 on the screen.

d. Turn screw 6 for optimal focus of the corresponding green line 6 on the screen.

5975288 BARCOGRAPHICS 8200 110497 12-5