Barco R9001330 owner manual Appendix E Source Number 90, Source numbers 90

Appendix E : Source Number 90 - 99

Source numbers 90 - 99

These source numbers do not correspond to physical inputs. They can only be used when the projector is equipped with a RCVDS 05 or VS05. An additional adjustment file can be created for these source numbers. This file can contain different settings. The relationship between sources 0 - 9 and 90 - 99 is shown in the diagram below.

source input 1	source number 1	file A
	source number 91	file A'
source input 2	source number 2	file B
	source number 92	file B'
source input 3	source number 3	file C
	source number 93	file C'
source input 9	source number 9	file I
	source number 99	file I'

Follow the steps below to create a second file for sources 0 to 9 :

1.Select the source between 0 and 9.

2.Select the corresponding source number between 90 and 99 with the digit keys on the RCU.

3.Enter the adjustment mode and load a corresponding file. Edit this file if necessary.

4.Save the file and exit the adjustment mode.

5975288 BARCOGRAPHICS 8200 110497 E-1