
Service Mode
Preset Input Balance
Highlight White Balance by pushing the control disk up or down and press ENTER to select.
With the white balance adjustment, the gain of the red and blue channels can be adjusted in comparison with the green channel. (To adjust the gain of the complete video signal, use the contrast adjustment)
Use the control disk by pushing up or down to change Red or by pushing to the right or to the left to change Blue.
Press EXIT to return to the Preset Input Balance menu.
SERVICE |
|
PANEL ADJUSTMENTS |
|
PRESET INPUT BALANCE |
|
60Hz TRACKING |
|
I2C DIAGNOSIS |
|
MORE... |
|
PRESET INPUT BALANCE | |
WHITE BALANCE | |
Select with <ENTER> | |
<EXIT> to return | |
Adjust |
|
red with | or |
blue with | or |
| 5975288 BARCOGRAPHICS 8200 110497 | |
| ||
|
|
|