Random Access Adjustment Mode

Geometry

Highlight Geometry by pushing the control disk up or down and press ENTER to select the geometry selection menu.

The following adjustment are possible :

-horizontal and vertical image shift.

-horizontal and vertical image size

-side keystone (only necessary if the projector is mounted under a non standard projection angle).

-blanking

-options

The following ways are possible to adjust a geometry function :

-using the control disk to adjust or

-entering the value with the digit keys. Therefore, press ENTER to select the indicated value and enter the desired value with the digit keys. Press ENTER to confirm the entered value.

Shift

Highlight Shift by pushing the control disk up or down and press

ENTER.

The image can be shifted in a horizontal or vertical direction. Push the control disk up or down to shift the image in a vertical direction. Push the control disk to the right or to the left to shift the image in a horizontal direction. The default value for the shift is 0.

Shifting in a vertical direction : when the shift value is positive, the image is shifted upwards, when the value is negative, the image is shifted downwards.

Shifting in a horizontal direction : when the shift value is positive, the image is shifted to the right, when the value is negative, the image is shifted to the left.

RANDOM ACCESS

 

ADJUSTMENT MODE

 

FILE SERVICE

 

PICTURE TUNING

 

GEOMETRY

 

GEOMETRY

 

SHIFT

 

SIZE

 

SIDE KEYSTONE

BLANKING

 

OPTIONS

 

Select with

or

then <ENTER>

<EXIT> to return.

GEOMETRY

 

SHIFT

SIZE

SIDE KEYSTONE

BLANKING

OPTIONS

Select with or

then <ENTER>

<EXIT> to return.

11-16

 

5975288 BARCOGRAPHICS 8200 110497

 

 

 

 

Page 81
Image 81
Barco R9001330 owner manual Geometry, Shift