Safety Instructions
Instructions to the user :
if this equipment does cause interference to radio or television reception, the user may try to correct the interference by one or more of the following measures :
-
-Relocate the equipment with respect to the receiver.
-Plug the equipment into a different outlet so that the equipment and
receiver are on different branch circuits.
• Fasten cables connectors to the equipment by mounting screws.
Note :
The use of shielded cables is required to comply within the limits of Part15 of FCC rules.
General safety instructions.
*All the safety and operating instructions should be read before using this unit.
*The operating instructions manual should be retained for future reference.
*All warnings on the projector and in the documentation manuals should be adhered to.
*All instructions for operating and use of this equipment must be followed precisely.
ON SAFETY
plug into the outlet, contact your electrician to replace your obsolete outlet. Do not defeat the purpose of the
WARNING FOR THE CUSTOMERS: THIS APPARATUS MUST BE GROUNDED (EARTHED) via the supplied 3 conductor AC power cable.
(If the supplied power cable is not the correct one, consult your dealer.)
A. Mains lead (AC Power cord) with CEE 7 plug:
The colors of the mains lead are colored in accordance with the following code:
Blue:Neutral
Brown:Live
B. Power cord with ANSI 73.11 plug:
The wires of the power cord are colored in accordance with the following code.
Green/yellow:ground
White:neutral
Black:live
*This product should be operated from an AC power source. This projector may be connected to an
*This product is equipped with a
*Do not allow anything to rest on the power cord. Do not locate this product where persons will walk on the cord.
5975288 BARCOGRAPHICS 8200 110497 |
| |
| ||
|
|
|
