Barco R9001330 owner manual Edit file, Random Access Adjustment Mode, Enter

Random Access Adjustment Mode

Edit file

The Edit file menu makes it possible to change the settings of the file according to the real settings of the connected source. Consult the source specification before entering the data.

To start up the EDIT menu, push the control disk up or down to select EDIT in the FILE menu and press ENTER.

Select the file which must be edited (mostly the active file) and press

ENTER.

The Edit file adaptation menu will be displayed.

The file name will be displayed in the upper right corner. The following items can be adjusted :

Total quantity horizontal pixels Active quantity horizontal pixels Horizontal shift in pixels

Horizontal period in µs (is automatically adapted during the installa- tion of a file with LOAD)

Total vertical lines (is automatically adapted during the installation of a file with LOAD)

Active vertical lines Vertical shift in lines

Interlaced : toggle on/off (is automatically set to its correct position during the installation of a file with LOAD)

All settings can individually be changed. Push the control disk up or down to select an item. The color of the selected item will change and follow one of the three methods to change the value.

a. press ENTER to activate the digits and enter directly with the numeric keys on the RCU or local keypad the new value or

b. press ENTER to activate the digits. Push the control disk to the right or to the left to select the changing digit. Push the control disk

FILE SERVICE
LOAD
EDIT
RENAME
COPY
		EDIT FILE
Filename		Src	Resolution
-----------------------------------------------------
pal	.s01	1	675x278i
pal	.c01	1	675x278i
secam	.s03	3	675x278i
-----------------------------------------------------
Active file : pal.c50
	Select with		or	,
	<ENTER> to accept
	<EXIT> to return.

5975288 BARCOGRAPHICS 8200 110497 11-5