Options
Source number : The source number of a
Clamp position : Clamping determines the black level of the signal. The clamp pulse can be related to the leading or the trailing edge of the sync pulse. Use the ENTER key to toggle between [leading] and [trailing].
Clamp delay : The time between the leading edge of the clamp pulse and the locked edge of the sync pulse.
Can be any value between 0 and 127. Change the value by pushing the control disk to the left or to the right.
Clamp width : The width of the clamp pulse
Can be any value between 0 and 127. Change the value by pushing the control disk to the left or to the right.
Field polarity : Default [auto]
[auto] = autodetection of the field polarity.
The field polarity function is used for interlaced images. Both rasters of the image could be shifted in a wrong way (double lines are visilble in the image). This can be corrected by forcing the field polarity to [neg] or [pos].
Use the ENTER key to toggle between [auto], [pos] and [neg].
Field select : Default [both]
The field select is only used for interlaced images. One frame of an interlaced image contains two fields, an even and an odd field. The choice exists to project [both] fields on the screen or only the [even] or [odd] field. This can be useful for 3D projection.
Use the ENTER key to toggle between [both], [even] and [odd].
Random Access Adjustment Mode
EDIT FILE OPTIONS | ||
Source number |
| 1 |
Clamp position |
| [leading] |
Clamp delay |
| 0 |
Clamp width |
| 10 |
Field polarity |
| [pos] |
Field select |
| [both] |
Vertical refresh |
| [sync] |
Vert. sync polarity | [leading] | |
Select with | or | |
<ENTER> to toggle | ||
or | to change value | |
<EXIT> to return | ||
Example for clamp position [trailing]
e d g e | e d g e |
le a d in g | tra ilin g |
S y n c p u l s e
C l a m p p u l s e
C l a m p
w id t h
C l a m p d e l a y
5975288 BARCOGRAPHICS 8200 110497 |
| |
| ||
|
|
|
