Connections
Connecting a RCVDS 05 to the projector.
Connecting an IR Remote Receiver 800 to the projector.
-Up to 10 or 20 inputs(video) with the RCVDS 05 and 90 inputs when RCVDS's are linked via the expansion module.
-Serial communication with the projector.
-Remote control buttons on the RCVDS to control the projector (source selection and analog settings).
-The selected source number will be displayed on a 2 digit display and the selected input module will be indicated with a LED on the rear.
For more information about the use of the RCVDS 05, consult the owner's manual, order number : R5975765.
Connecting a VS05 to the projector.
The VS05 can switch up to 5 Composite Video sources, 3 Super Video sources and 1 RGB analog or component video source to the projector. In addition, the audio signal proper to the source, can be switched to an audio amplifier.
Order number : R9827890
This infrared red receiver unit makes it possible to control the projector from another room.
There is a communication line cable between the IR receiver and the projector or the RCVDS. The control information from the RCU can now be sent to the IR Remote Receiver 800.
The IR Remote Receiver 800 displays the selected source on a 7- segment display.
Order number : R9827515.
Communic ation c able
IR Remote Rec eiv er 800
BARCO G RAP HICS 8100
S cree n
For more information about the use of the VS05, consult the VS05 owner's manual, BARCO order number : R5975245.
Projection room | Contro l room |
| 5975288 BARCOGRAPHICS 8200 110497 | |
| ||
|
|
|
