OPERATIONS (continued)

No Signal Menu

The same adjustments and settings are available with the Image and Options menus when the MENU button is pressed during display of the “NO INPUT IS DETECTED ON ***” or “SYNC IS OUT OF RANGE ON ***” message while no signal is received.

Table 8. No Signal Menu

VOLUME

BLANK

MIRROR

START UP

MENU COLOR LANGUAGE

AUTO OFF

SYNC ON G

WHISPER

16

ENGLISH

Item

Description

 

Volume Adjustment: Reduce VOLUME Increase VOLUME

VOLUME

• When this function is used, audio input is automatically switched to video. The

audio input can be switched by moving the DISK PAD left and right during the

 

display of the volume adjustment bar. The volume adjustment bar is displayed by

 

pressing VOLUME or VOLUME button.

 

Select Blank Screen Color: Select the color with the

and

buttons.

BLANK

•The image is cleared and the entire screen is displayed in the selected color,

when BLANK mode is set with BLANK ON, or when there is no signal for 5

 

 

minutes.

 

 

 

 

 

 

 

 

 

 

MIRROR

Operation Start/Stop: Press the

/

button.

 

 

Select Mirror Status: Select the mirror status with the

and

buttons.

 

 

 

 

 

 

 

 

Operation Start/Stop: Press the

/

button.

 

 

START UP

Setup Initial Screen Display: Select the TURN ON with the

button.

Clear Initial Screen Display: Select the TURN OFF with the

button.

 

 

• Note that if TURN OFF is selected the blank screen is displayed in blue when there is no signal.

 

 

 

MENU COLOR Select Menu Background Color: Select the color with the

and

buttons.

Operation Start/Stop: Press the / button.

LANGUAGE Select Menu Display Language: Select the language with the and buttons.

 

Operation start/stop: Press the / button.

 

 

Set AUTO OFF: Set 1~99 minutes with the and

buttons. The

AUTO OFF

system automatically enters the standby mode when a signal is not

received for the set time.

 

 

Clear AUTO OFF: Select the STOP (0 min.) with the

button. When

 

the STOP is selected the system does not enter the standby mode even

 

if no signal is received.

 

Operation Start/Stop: Press the / button.

SYNC ON G Valid: Select the TURN ON with the button.

SYNC ON G SYNC ON G Invalid: Select the TURN OFF with the button.

May not be displayed correctly with some input signals when the SYNC ON G is valid. In such cases, remove the signal connector so that no signal is received, set the SYNC ON G to invalid, and reconnect the signal.

Operation Start/Stop: Press the / button.

WHISPER

Set/Clear Wisper Mode: Press / button. When the WHISPER is

selected, the WHISPER mode is active. In the WHISPER mode,

 

acoustic noise level from the unit is reduced, brightness level on screen

 

is a little lower.

ENGLISH-15

Page 16
Image 16
Hitachi CP-S225W, CP-X275W user manual No Signal Menu, Select Blank Screen Color Select the color with

CP-S225W, CP-X275W specifications

The Hitachi CP-X275W and CP-S225W are advanced projectors designed to meet the varied needs of educational institutions, corporate environments, and home theaters. Both models boast impressive features and cutting-edge technologies that enhance user experience and image quality.

The CP-X275W projector is particularly noteworthy for its WXGA resolution of 1280 x 800 pixels, which enables a clear and vibrant display suitable for detailed presentations and graphics. It has a brightness level of 3,200 ANSI lumens, ensuring that images remain sharp and visible even in well-lit rooms. The contrast ratio of 2,000:1 further enhances image clarity, providing deeper blacks and more vibrant colors.

One of the most significant features of the CP-X275W is its advanced lens shift and keystone correction capabilities. These technologies allow users to adjust the image projection without distorting the picture, making installation more flexible. Moreover, the projector supports various input options, including HDMI, VGA, and USB, providing versatility for different devices and technologies.

On the other hand, the CP-S225W is tailored for more budget-conscious users while still delivering impressive performance. With a resolution of XGA at 1024 x 768 pixels and a brightness of 2,600 ANSI lumens, this model is well-equipped for classroom settings or small conference rooms. The 1,600:1 contrast ratio ensures that presentations remain clear, with defined image quality that captures audience attention.

Both projectors incorporate Hitachi’s proprietary technologies for enhanced performance. The lamps are designed with long operational life, up to 5,000 hours in eco mode, reducing maintenance costs and downtime. Additionally, they feature Hitachi’s Image Care technology, which maintains optimal image quality and energy efficiency, adjusting brightness based on the content being displayed.

Another highlight of both models is their portability, with a compact design and a weight that enables easy transport. They also include built-in speakers, eliminating the need for external audio equipment in many scenarios.

In summary, the Hitachi CP-X275W and CP-S225W projectors stand out for their robust features, image quality, and user-friendly technologies. While the CP-X275W is suited for high-demand environments requiring superior clarity and detail, the CP-S225W provides an excellent value proposition for everyday use. Both projectors cater to diverse audience needs, making them excellent choices for various applications.