VIBE OWNER’S MANUAL — 1
FEATURES AND CONTROLS
VIBE232/242/252/262/292
High
Level High
Pass Mode Low
Pass
Bass
Boost Remote
R
L
Line
Out
Line
Input
Min Max 40Hz 3kHz Full Low 40Hz 350Hz
On Off
PWR
PROT
R
L
POWER & PROTECTION INDICATORS
Provide instant information on status of amplifier,
including short-circuit and thermal overload alerts.
REMOTE CONTROL
BASS BOOST CONTROL
Increases sound level in lower frequencies by 18dB.
LOW PASS FILTER
When Crossover Mode Selector is in Low Pass Mode,
this control limits the frequencies which will be
distributed to the speakers to those below the value
to which this is set within the range 40-350Hz.
CROSSOVER MODE SELECTOR
Determines the mode of built-in crossover:
low pass (permits only low frequency signals to
pass to speakers), high pass(permits only high
frequency signals to pass to speakers), or flat.
HIGH PASS FILTER
When Crossover Mode Selector is on High Pass Mode,
this control limits the frequencies which will be
distributed to the speakers to those above the value to
which this is set within the range 40Hz-3kHz.
INPUT LEVEL CONTROLS
Enables the matching of input levels to the
output levels from the head unit (or other
signal source).