PAYCLOCK & FACEIN USER’S GUIDE
88
FaceIN WAN Installation
At the remote site install mount and connect the FaceIN
terminal to the network.
With the FaceIN powered up and connected to the network,
press the MENU key, the Functions Menu will open.
Press 4, the System Setting menu will open.
From the System Setting menu, press 2 - Set Network.
Note: You may have to enter leading zeros when entering the
addresses. For example, the address 10.0.0.1 would be entered as
010.000.000.001 at the terminal.
Enter the IP Address for the terminal and press OK. Note:
This is the IP address from where the FaceIN terminal will
reside at the remote site.
Enter the Mask Code and press OK. Note: This is the subnet
Mask address from where the PayClock database computer
resides. Refer to the Connection Info print out.
Enter the Gateway Address and press OK. Note: This is the
Gateway address from where the PayClock database
computer resides. Refer to the Connection Info print out.
The FaceIN terminal will restart automatically.
To verify the connection open PayClock, select the Terminal
Manager tab and click the Test Connection button.
The FaceIN terminal will be operational.
Update the FaceIN terminal and enroll the employee faces.