Legacy Car Audio LCD75DFX Operation of Remote Control, Replace the Battery of Remote Control

OPERATION OF REMOTE CONTROL:

Note:

Before use this remote control, please make sure turn on the device by pressing the power button on the front control panel.

1. Power On/Off. 2. Mute Button

3.Loudness Button

Press this button briefly to enhance the bass effect while the volume is low. Press again to cancel the loudness effect.

4.Level/MENU UP Button

5.SEL/MENU Button

6. Level/MENU Down Button 7. MO/ST Button

8. A.P Button 9.Band Button			10. Mode Button
11.Tune/Seek Up And Track Skip Up/FF Button
12.Tune/Seek Down And Track Skip Down/REW Button
13.	SCAN BUTTON	14. Clock Display /Setting Button
15.	LO/DX Button
	At radio mode, press it to change local reception or distance reception.
	And the LOC will showing on the LCD display when the receiver detect
	some signal of stable local station.
	Note: This operation is only effective on FM reception. During AM mode,
	LOC is ineffective.
16.	CD Track TOP/Radio Preset 1		17. CD Track INT/Radio Preset 2
18.	CD Track RPT/Radio Preset 3		19. CD Track RDM/Radio Preset 4
20.	Radio Preset 5		21. Radio Preset 6

The Maintenance of Remote Control

REPLACE THE BATTERY OF REMOTE CONTROL:

1.Remove the battery holder as the direction indicated by the arrow. 2.Replace the battery, Set a new battery properly with (+) side up. 3.Insert the battery holder. Push in the holder to the original position.

BATTERY INFORMATION: Designated Battery: CR2025 3V

Battery Life: 6 months with normal use in normal room temperature, and the out of date battery must be immediately removed and disposed properly.

CAUTION:

Improper use of batteries may cause overheating, explosion or ignition, and resulting in jury or fire .

Battery leakage may cause damage to the unit.

Do not disassemble or short the batteries.

Do not throw the batteries into the fire.

To avoid the risk of accident, keep the batteries out of reach of children.

5 6