WIRE CONNECTION |
|
| RESET FUNCTION | ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
CAUTION : Do not connect the speaker wires to chassis or car body. Each speaker wire cannot be soldered together with other wires. Otherwise, the unit will be damaged and no sound will come out anymore.
The RESET button is located on the front of main panel. It is recessed in order to prevent accidental engagement, and can be activated with the tip of a
a)Initial installation after all wiring is completed.
b)Abnormal operation is encountered such as numerical indication on display is erratic.
c)Whenever the reset button is activated, all preset memory content will be erased and must be reprogrammed.
REMOTE CONTROL | INSTALLATION |
| CAUTION : DO NOT PLACE THE UNIT OVER THE |
| MAXIMUM INSTALLATION ANGLE OF 30° . |
| OTHERWISE, THE UNIT MAY NOT WORK |
| PROPERLY. |
| WARNING!! |
| Due to protection of CD Mechanism, two small screws on |
UNIT REMOVAL | the top of the unit must be released before operate the unit. |
Otherwise, the CD Mechanism can not be working properly. |
1. | Remove Front Control | Panel. |
2. | Slightly insert the key into the slot and | |
| gently to release. |
|
3. | Separate the sleeve from the unit. Keep | |
| release key in a safe place as you may | |
| need for future removal of unit. | |
P / N : | Page. 4 | |
P / N :
