FLASHING LED
If the front panel is not on the main unit, LED (19) will be flashing.
RESET BUTTON FUNCTION
RESET button (20) is placed on the housing and must be activated with either a ballpoint pen or thin metal object. The RESET button is to be activated for the following reasons:
Note: If press RESET button , the unit can't work yet, please use a cotton swab soaked in isopropyl alcohol to clean the socket on the back of the front panel.
RADIO OPERATION
BAND
Press BND button (11) to change bands as below:
FM
MW
LW
For 3 Bands (Europe)
FM 
MW
For 2 Bands (Europe)
FM 
AM
For 2 Bands (USA)
SELECT STATION
Rotate TUNING knob (3) clockwise or anticlockwise to adjust the frequency upward or downward.
AF
AF button (1)[ALTERNATIVE FREQUENCIES](FOR RDS ONLY)
1.By pushing short.
1)RADIO mode
changed the mode to CDP mode.
2). CDP mode
changed the PLAY mode to PAUSE mode and vice versa.
2. By pushing long.
It is engaging whether "AF SEARCH" mode ON or OFF.
If "AF SEARCH" mode is tunred on, the 1'st AF is displayed onthe LCD. All the AF list can be shown by pressing "DISPLAY" key during "AF SEARCH ON" mode. When AF is shown, the display mode changes to the frequency if the user changes the frequency.RDS signal is NOT received during AF search mode. This mode is released after few seconds. But, this mode is NOTreleased during changing the tunned frequency to search AF.
LOCAL/DISTAN
Press the LOC button (18) to select between local setting for reception of strong station and distant setting for reception of weak stations when tuning.
MONO/STEREO
In FM band, press MON button (5) to select mono or stereo reception for radio stations. You can sometimes improve reception of distant stations by selecting mono operation.
TA
TA function [TRAFFIC ANNOUNCEMENT] BUTTON(FOR RDS ONLY) When pressed short
1). RADIO mode
Depending on the installed option diode matrix,
LW/MW/FM band is toggled cyclically through the tuning bands.
or |
13
