EN | Dimension | 111 x 43 x 23 mm |
|
| 4.37 x 1.69 x 0.90 in |
Weight | 100 g |
Temperature range: | |
Storage | |
Operation | |
0°C to +40°C | |
| (32°F to +104°F) |
*Use a target plate to increase the measurement range during daylight or if the target has poor reflection properties! ** in favourable conditions (good target surface properties, room temperature) up to 10 m (33 ft). In unfavourable condi- tions, such as intense sunshine, poorly reflecting target surface or high temperature variations, the deviation over distances above 10 m (33 ft) can increase by ± 0.15 mm/m (± 0.0018 in/ft).
Electromagnetic Compatibility (EMC)
The term "electromagnetic compatibility" is taken to mean the capability of the product to function smoothly in an environment where electromagnetic radiation and electrostatic discharges are present, and without causing electromagnetic interference to other equipment.
WARNING
The Leica DISTO™ conforms to the most strin- gent requirements of the relevant standards and regulations.
Yet. the possibility of the product causing interfer- ence in other equipment cannot be fully excluded.
FCC statement (applic. in U.S.)
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful inter- ference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be deter- mined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•Consult the dealer or an experienced radio/TV technician for help
WARNING:
Changes or modifications not expressly approved by Leica Geosystems for compliance could void the user’s authority to operate the equipment.
Appendix
10
Leica DISTO™ D2 762960 en
