Leica 762960 manual Start up, Operation

Display

See drawing {B}

1Laser "ON"

2Reference (front/rear/end piece)

3 Pythagoras

4 Timer (self-triggering)

5 Historical memory

6 Area/volume

7 Battery status

8 Units with exponents (2/3)

9 Intermediate line 2

10 Intermediate line 1

11 Main targets

12 min / max display

13 Info symbol

Start up

Inserting / Replacing Batteries

1Remove battery compartment lid.

See drawing {C}.

2Insert batteries, observing correct polarity.

3 Close the battery compartment.

• Replace the batteries when the symbol flashes permanently in the display.

)	Only use alkaline batteries.
)	If the instrument will not be used for a long

time, remove the batteries as a protection against corrosion.

Operation EN

Measuring Conditions

Range

Range is limited to 60 m (197 ft).

At night or dusk and if the target is in shadow the measuring range without target plate is increased. Use a target plate to increase the measurement range during daylight, or if the target has poor reflec- tion properties!

Target Surfaces

￿CAUTION:Measuring errors can occur when measuring toward colourless liquids (e.g. water) or dust free glass, Styrofoam or similar semi-permeable surfaces. Aiming at high gloss surfaces may deflect the laser- beam and lead to measurement errors.

Hazards of Use

￿CAUTION:

Watch out for erroneous distance measure-

ments if the instrument is defective or if it has been dropped or has been misused or modified.

Precautions:

Carry out periodic test measurements.

Particularly after the instrument has been subject to

Leica DISTO™ D2 762960 en

3

Start up