Leica DM100 user manual ,

Leica DM100 User Manual 13
Electrical Data and ambient Conditions
In order to maintain this condition and to ensure safe operation, the user must follow the instructions and warnings contained in
this instruction manual.
Environment
Temperature for use +10 °C … +40 °C
Storage temperature -20 °C … +52 °C
+50 °F to +104 °F
Manipulation shock 25 mm on 50 mm hard wood
Transport shock (unpacked) 100 g / 6 ms
Transport shock (packed) 800 mm free fall
Transport vibrations (unpacked) 5–200 Hz / 1.5 g
Air pressure during use and storage: 500–1060 mBar
Humidity during use and storage: 20–90%
Installation Category II (Overvoltage Category)
Pollution degree 2
Fuse Replacement
Unplug the instrument before changing any fuses. The Leica
DM100 has two fuses, which are located behind the power cord
receptacle.
Only use fuses of the following type: 5×20 mm, 1.0 A/250V, high breaking capacity (# 13RFAG30003)
Electrical data
Input: 100-240 V, 50/60 Hz, 5 W (3 W LED)
General safety notes
This instrument of safety class 1 has been built and tested in accordance
with the following safety requirements for electrical equipment for measu-
rement, control, and laboratory use:
EN 61010-1: 2002-08
EN 61010-2: 2008-06
IEC 61010-1: 2010-06
EN 61326-1: 2006-10
EN 61326-2-6: 2006-10
EN 55011: 2007+A2: 2010-05
EN 60825-1: 2008-05
IEC 60825-1: 2007-03
LED Class 1