Leica DM100 User Manual 11
Information for the Person responsible for the Instrument
Information for the Person responsible for
the Instrument
ϘEnsure that the Leica DM100 is used only by
persons qualified to do so.
ϘEnsure that this User Manual is always
available at the place where the micro-
scope is in use.
ϘCarry out regular inspections to make
certain that the authorized users are adhe-
ring to safety requirements.
ϘWhen instructing new users, do so
thoroughly and explain the meanings of
the warning signs and messages.
ϘAllocate responsibilities for commissio-
ning, operation and maintenance. Monitor
compliance with this.
ϘDo not use the Leica DM100 unless it is in
perfect condition.
ϘInform your Leica representative or Leica
Microsystems (Schweiz) AG, Industry
Division, 9435 Heerbrugg, Switzerland,
immediately of any product defect that
could potentially cause injury or harm.
ϘIf you use accessories from other manu-
facturers with the microscope, make sure
that these manufacturers confirm that the
combination is safe to use. Follow the inst-
ructions in the User Manual for those acces-
sories.
ϘModifications to or service on the micro-
scope may be carried out only by technici-
ans who are explicitly authorized by Leica
to do so.
ϘOnly original Leica replacement parts may
be used in servicing the product.
ϘAfter service work or technical modifica-
tions, the unit must be reconfigured with
observance to our technical requirements.
ϘIf the unit is modified or serviced by unau-
thorized persons, isimproperly maintained
(as long as maintenance was not carried
out by Leica Microsystems), or is handled
improperly, Leica Microsystems will not
accept any liability.
ϘThe building’s electrical wiring must
comply with the relevant national stan-
dard; in other words, we recommend using
a current-operated ELCB system (RCB).