Leica DM100 Oil Immersion Technique (cont.)

Leica DM100 User Manual 31

7. Look through the microscope and slowly

rotate the ﬁne adjustment knob, so that the

specimen stage moves upwards until the

specimen is in focus.

8. If you are ﬁnished working with the oil

immersion objective, clean the front side

of the objective, the specimen slide, and all

other surfaces that have come into contact

with the oil, following the instructions in

the "Care of the Microscope" section on

page 34.

Oil Immersion Technique (cont.)

Contents

Main Congratulations! Table of Contents Page Symbols Used in this User Manual Important Safety Notes Important Safety Notes (continued) Instructions for Use Instructions on Use (continued) Health Risks and Dangers of Use Information for the Person responsible for the Instrument Accessories, Maintenance and Repair Electrical Data and ambient Conditions Page Unpacking Page Fitting the tube Removing and Inserting Objectives Removing and Inserting Objectives (continued) Installing the Mirror (optional) Installing the Polarizer Kit (optional) Page Switching on the Microscope Selecting an Objective Page Focusing Adjusting the Binocular Tubes Adjusting the Binocular Tubes (continued) Adjusting the Eyecups Oil Immersion Technique (only 100 objective) Oil Immersion Technique (cont.) Page Maintenance instructions General Maintenance General Maintenance (cont.)