Leica DM100 Removing and Inserting Objectives (continued)

Leica DM100 User Manual 19

Inserting Objectives

1. Screw the 4× objective into any available

space on the objective nosepiece.

2. Turn the objective nosepiece clockwise one

unit.

3. Screw in the next-largest objective.

4. Repeat steps 2 and 3 until all objectives

have been installed.

Removing and Inserting Objectives (continued)

Contents

Main Congratulations! Table of Contents Page Symbols Used in this User Manual Important Safety Notes Important Safety Notes (continued) Instructions for Use Instructions on Use (continued) Health Risks and Dangers of Use Information for the Person responsible for the Instrument Accessories, Maintenance and Repair Electrical Data and ambient Conditions Page Unpacking Page Fitting the tube Removing and Inserting Objectives Removing and Inserting Objectives (continued) Installing the Mirror (optional) Installing the Polarizer Kit (optional) Page Switching on the Microscope Selecting an Objective Page Focusing Adjusting the Binocular Tubes Adjusting the Binocular Tubes (continued) Adjusting the Eyecups Oil Immersion Technique (only 100 objective) Oil Immersion Technique (cont.) Page Maintenance instructions General Maintenance General Maintenance (cont.)