Leica DM100 Installing the Mirror (optional)

Leica DM100 User Manual 20

Installing the Mirror (optional)

The mirror is available as an optional

accessory. By means of this, the ambient

light can be used for illuminating the sample if

no power source is available for the built-in LED

illuminator.

The mirror is equipped with a ﬂat and

a concave surface. Try them out to see

which side works better.

Installing the Mirror

1. Position the microscope at a well-lit loca-

tion, for example before a window.

2. Press the mirror onto the mount of the illu-

minator.

3. Look through the eyepieces and align the

mirror so that it works best.

Removing the Mirror

1. Simply pull the mirror out of the holder.

Contents

Main Congratulations! Table of Contents Page Symbols Used in this User Manual Important Safety Notes Important Safety Notes (continued) Instructions for Use Instructions on Use (continued) Health Risks and Dangers of Use Information for the Person responsible for the Instrument Accessories, Maintenance and Repair Electrical Data and ambient Conditions Page Unpacking Page Fitting the tube Removing and Inserting Objectives Removing and Inserting Objectives (continued) Installing the Mirror (optional) Installing the Polarizer Kit (optional) Page Switching on the Microscope Selecting an Objective Page Focusing Adjusting the Binocular Tubes Adjusting the Binocular Tubes (continued) Adjusting the Eyecups Oil Immersion Technique (only 100 objective) Oil Immersion Technique (cont.) Page Maintenance instructions General Maintenance General Maintenance (cont.)