Leica DM100 - page 27

Leica DM100 User Manual 27

1. Adjust the tubes to your interpupillary

distance. Fold or unfold the eyetubes to

decrease or increase the distance between

the eyepieces until you see one illuminated

circle.

The viewing tubes maintain a constant

tube length for all interpupillary settings.

This means that a change of interpupillary

distance does not aﬀect parfocality, magniﬁca-

tion, or calibrations that depend on magniﬁca-

tion.

Leica EZ tubes

If you are using a Leica EZ viewing tube, which

already has the eyepieces integrated with the

eyetubes, no additional adjustments are neces-

sary. Be sure you are wearing your eyeglasses or

contact lenses. Continue with the "Oil immer-

sion" section on page 30.

Open Binocular Tube

If you are using an open standard tube, you

need to make some adjustments.

1. Set the focusing eyetube (left side) to "0"

Adjusting the Binocular Tubes

✓

✗

Continued on next page

Contents

Main Congratulations! Table of Contents Page Symbols Used in this User Manual Important Safety Notes Important Safety Notes (continued) Instructions for Use Instructions on Use (continued) Health Risks and Dangers of Use Information for the Person responsible for the Instrument Accessories, Maintenance and Repair Electrical Data and ambient Conditions Page Unpacking Page Fitting the tube Removing and Inserting Objectives Removing and Inserting Objectives (continued) Installing the Mirror (optional) Installing the Polarizer Kit (optional) Page Switching on the Microscope Selecting an Objective Page Focusing Adjusting the Binocular Tubes Adjusting the Binocular Tubes (continued) Adjusting the Eyecups Oil Immersion Technique (only 100 objective) Oil Immersion Technique (cont.) Page Maintenance instructions General Maintenance General Maintenance (cont.)