Analog Video Display without a Computer
The image cannot be output via both the HDMI and analog ports simultaneously.
The HDMI port always has priority. To output the image via the analog port, you have to remove the HDMI cable from the camera.
Connection
1.Plug the power cable into the correspon- ding connector on the rear side of the Leica IC80 HD and the other end into a suitable power socket.
2.Plug the video cable into the "Video" port on the rear side of the Leica IC80 HD and the other end into the analog port of the device (projector, monitor, recorder etc.).
Changing the video standard
If you see a distorted image or no image at all on your analog device, you may
have to change the video standard.
1.To change between the "PAL" and "NTSC" video standards, carefully press the toggle button once using the tip of a pen or pencil.
Leica IC80 HD | Manual | 25 |
|
|
|