Intermate i5, AS/400 Into the Hpmacro command, Overlay you wish to download as an HP macro, Types

into the HPMACRO command.

Download overlay as a HP-macro (HPMACRO)

Type choices, press Enter.

InterForm	400 file set .	. . . . KARTSET	______	Character value
Overlay name		. . . . KLICHE	______	Character value
Printer type		. . . . PRTTYP	______	IBM4019, IBM4029, IBM4039...
Interface	. . . . . . .	. . . . INTERF	______	SYSTEM, SYSTEM850, ASCIIR8...
Macro-id (0 32767) . . .		. . . . MACROID	______	0-32767
Automatic on every page		. . . . AUTOMATIC	______	*NO *YES
Place into Flash Memory		. . . . FLASHMEM	______	*NO *HP4 *IBM4039
Output queue		. . . . OUTQ	______	Name, *JOB
Library	. . . . . . .	. . . .	_______	Name, *LIBL
Form type	. . . . . . .	. . . . FORMTYPE	______	Character value

Bottom

F3=Exit F4=Prompt F5=Refresh F12=Cancel F13=How to use this display F24=More keys

KARTSET:	Defines the name of the file-set, in which you have defined the
	overlay you wish to download as an HP macro.
KLICHE:	Is the name of the overlay you wish to download.
PRTTYP:	States the printer type you wish to use. If you are using another
	printer type than the ones listed in PRTTYP you should select
	HPII. Refer to page 374 for further information on the printer
	types.
INTERF:	Defines how the printer is connected to the AS/400 system. Refer
	to page 378 and 268 for further information on the interface
	types.
MACROID:	An HP macro must be given an ID in the interval 0-32767. The
	printer can store a number of different macros. If a macro is
	down loaded with the same macro ID as one already resident in
	the printer, the new macro definition will override the old one. If
	you choose to work with several macros in the printer
	simultaneously you should number the macros unambiguously.
AUTOMATIC:	This parameter defines if the macro should be executed on all
	pages (*YES) or only when called from a macro definition
	incorporated in the print data (*NO).
FLASHMEM:	This parameter indicates if the macro should be stored in e.g. the
	optional Flash SIMM module on a printer. Valid values are:
	*No	= Only downloaded to the memory of the printer.
	*HP4	= Store in HP Flash SIMM.
OUTQ:	Here the output queue for the final printout is stated. The macro
	will be transformed into a spool-entry with the filename
	MACROnnnnn, where nnnnn is the macro ID. The description of
	the spool entry will be the name of the overlay.
FORMTYPE:	This is the forms type you want the macro to have when placed
	as a spool-entry on the output queue defined by OUTQ.

The output will be placed in the output queue with status HOLD(*YES) and SAVE(*YES).

User’s Manual for InterForm400® 417