Intermate iSeries, i5, AS/400 manual Define X-axis points and X-axis groups, CHX100D, Mon

Define X-axis points and X-axis groups

When selecting Define X-axis points you get the screen below, which overviews the existing X-axis groups:

	Work	with X-axis groups		CHX100D
Chart . . .		. . . . . . : MYBAR
Type . . . .		. . . . . . : *BAR
Position to		. . . . .	Seq number
Type options, press Enter.
2=Change		3=Copy	4=Delete 5=Display
7=Assign new seq nbr to x-axis grp				12=Work with X-axis points
Opt	Seq number ID		Text
__	10	MON	Month

End

F3=Exit F5=Refresh F6=Create F12=Cancel

It is possible to change, copy and display the X-axis groups, it is also possible to change sequence numbers and to work with X-axis points for the specific group.

Pressing F6 for creating a new X-axis group will display this:

Create X-axis group		CHX110D
Chart	:	MYBAR
Type	:	*BAR
Seq number	.	___
X-axis group ID		___
Text	.	_______________________________________________
Text font	.	____
Text font color		___

F3=Exit F4=Prompt F12=Cancel

Seq number:Specify a sequence number. This will decide the order of the groups.

X-axis group ID:ID of the specific X-axis group.

Text:Text used to specify group on print out. (Printed below chart).

Text font/color:Font and color of the text above.

The position of the text is based upon the legend fields on the ’General Layout’ display and the layout of the x-axis.

Using option 12 it is possible to change sequence numbers and to work with X-axis points for the specific group as seen below.

440User’s Manual for InterForm400®