Intermate iSeries, i5, AS/400 manual Press F6 to create a new chart, Bar, *Line

Press F6 to create a new chart:

Create Chart definition		CHA110D
Chart	__________
Type	__________	*BAR, *LINE
Description	___________________________________

F3=Exit F12=Cancel

Chart:	The name of the chart, which is been created.
Type:	Write *BAR for a Bar chart and *LINE for a Line chart.
Description:	Description of chart (not printed).

After entering the parameters above and pressing Enter, the ’Create Chart definition’ display is shown:

Create Chart definition CHA300D

Chart . . . . . . . . . : MYBAR

Type . . . . . . . . . . : *BAR

Type options, press Enter. 1=Select

Opt	Definition
_	R Define general layout
_	Define layout of the X-axis
_	R Define X-axis points
_	R Define layout of the Y1-axis
_	Define layout of the Y2-axis
_	R Define observations

F3=Exit F12=Cancel

Note: R indicates required information.

Enter ‘1' next to the definition you want to create or change.

When finished editing the chart, press F3 to exit and save the chart definition.

User’s Manual for InterForm400® 437