Intermate AS/400, i5, iSeries manual Make a Test Print of the Overlay+Spool Data, No, *Yes

We have now made a copy of the overlay IF400DEMO from file-set SAMPLE and stored it by the name MYDEMO in file-set TEST.

Step 2. Make a Test Print of the Overlay+Spool Data

Before we start changing things we will make a printout of the overlay so we know what we have to begin with.

We press F3 to exit to the main menu

Enter menu 3. Merge spool entry with overlay:

Merge	Spooled File with Overlay		APF730D
Overlay name	MYDEMO____
or Overlay Selector	__________
Primary/Secondary set	_	1=Primary 2=Secondary
Spooled file:
Job name	__________
User	__________
Job number	_______
File name	__________
Spool file no.	_______	Number, *ONLY, *LAST
Code page	________	Number, *INPUT
Merge overprint lines	*NO_	*NO, *YES
Form type	*STD
Copies	__1	(1-255)
Drawer / Papertype	*PRINTER	(*PRINTER, *INPUT, *OVERLAY, 1-256, Name)
Name of output queue to	search if spooled file is unknown:
Output queue . . . .	AFC_INPUT1
Library	APF3812___
F3=Exit	F4=Prompt		F12=Cancel

MYDEMO is already filled in because it was the last overlay active in the design menu.

Now go to the lower part of the screen and fill in queue AFC_INPUT1 and library APF3812. In the Getting Started section page 30 we created a DEMO spool entry. This is still placed in the queue with the description PRTCTL. If you can’t find the spool entry, you can create it using option 1. Create demo spool entry (see page 337)

We press Enter to look at entries in queue AFC_INPUT1:

User’s Manual for InterForm400® 79