Intermate iSeries, i5, AS/400 manual Cleaning the Overlay for Remaining Text, APF300D

Step 17. Cleaning the Overlay for Remaining Text

If you printed the overlay at this stage, you will discover that the original text used for re- mapping are still visible.

On purpose we have not used “B=Blank after” in the Remap Window commands, as we have not been sure that we would have needed the text for other purposes.

Instead we have waited to this moment, where we will clean all remaining text by a single command.

We define our last sequence line 31:

	Design InterForm 400 overlay				APF300D
Overlay name: MYDEMO			Overlay text: MYDEMO
Seqnbr. Type		Overlay definition
0025	9	Remap window	30-042 pos 08-014		top 5,100 left 2,000 C
0026	9	Remap window	30-042 pos 15-025		top 5,100 left 3,000 C
0027	9	Remap window	30-042 pos 26-039		top 5,100 left 4,000 C
0028	9	Remap window	30-042 pos 40-053		top 5,100 left 5,000 C
0029	9	Remap window	30-042 pos 54-070		top 5,100 left 6,000 C
0030	?	If lin 030-042 pos 047-047 = 2			Then LIGHT
Seqnbr. Type
31,0	8	Tabulator
		Input:	Line	__1	- _80
			Position	__1	- _70
		Print:	From left edge	____14 Adjustment L (U L C R N B +)
			Font	__11	F4=List
		Condition: Position		___ - ___
			Is > = < N	_ __________________________
			Blank after	_ B = Blank condition after
F3=Exit		F4=Prompt	F18=DSPSPLF		F12=Cancel

Here we define one large tabulator which operates on the area from line 1 to 70 and position 1 to 80. Anything which not already have been fomatted by Tabulators or Remap Window commands will now be moved 14 inches to the right. Moving text beyond the paper edge will cause InterForm400® to discard the text.

We press Enter to save our last sequence line.

104User’s Manual for InterForm400®