Intermate AS/400, i5 Specify automatic start scheduling, Specify automatic start options, Qsysopr

Specify automatic start scheduling:

Specify automatic start scheduling OSC300D

Output queue . . . . . . : OSC_OUTQ01

Library . . . . . . . : APF3812

Type choices, press Enter.

Monday	Tuesday	Wed.day	Thursday	Friday	Saturday	Sunday
15:00	15:00	15:00	15:00	14:00	_____	_____
_____	_____	_____	_____	_____	_____	_____
_____	_____	_____	_____	_____	_____	_____
_____	_____	_____	_____	_____	_____	_____
_____	_____	_____	_____	_____	_____	_____

F3=Exit F12=Cancel F20=Sort by time

In the above entry screen we can define a scheduled start time of each day of the week, if an automatic run of the OSC job is required. As an alternative to a scheduled start of a OSC job, the job could be started manually by the option 1. Run OSC in 1. Functions attached to output queues.

Specify automatic start options:

Specify automatic start options			OSC300D
Output queue	:	OSC_OUTQ01
Library	:	APF3812
Type choices, press Enter.
Send message	.	4	1=Do not send message
			2=Before processing output queue
			3=After processing output queue
			4=Both before and after
Delayed auto start			1=Start job
option	.	1	2=Send inquiry message
			3=Skip delayed jobs
Message queue	.	QSYSOPR___
Library	.	QSYS______

Delayed auto start can occur if Output Schedule Control (OSC)

-or the entire system - is ended and later restarted. F3=Exit F12=Cancel

When the hour has come for OSC to start a OSC job, we can define some options, in connection with the OSC job. First we define when or if we wish to be notified about an OSC job. In addition we can define what should happen in the event that there has been taken back-up of the AS/400, IPL has been performed or any other reason for the OSC job not being able to run at the scheduled time.

Finally we define where possible messages are to be sent.

256User’s Manual for InterForm400®