Intermate i5, AS/400, iSeries manual F12

If you do not know the identification, or perhaps find it too labourious to enter all information, you may instead specify the output queue to which the spool entry belongs. This is entered at the bottom of the screen. You can then fetch the information about the spool entry by selecting it with option 1:

			Work with Output Queue
Queue: PRTHP3		Library: QUSRSYS
Type options, press Enter
1=Select 2=Change 3=Hold 4=Delete 5=Display 6=Release 8=attributes
Opt	File	User	User Data	Sts	Pages	Copies	Form Type	Pty
_	QPRINT	INTERMATE	INVOICE	RDY	1	1	*STD	5
1	QPRINT	INTERMATE	PROFIT	RDY	5	1	*STD	5
_	QPRINT	INTERMATE	BALANCE	RDY	1	1	*STD	5

Parameters for option 2

===> __________________________________________________

F3=exit F11=View 2 F12=Previous F21=Description F24=More keys

Output Queue:	The name of the output queue where the spool entry to be merged
	is placed
Library:	The library of the above output queue. If left blank the library list will
	be used.
F3	If you press F3 you will return to the main menu. Actual printing is
	not performed until all spool entry specifications for this particular
	report have been made. This means that the use of F3 somewhere
	in the process prevents anything from being written at all.
F12	If you press F12 the system returns to the preceding screen without
	any selection being made.

J TIP J

After a merge with an overlay, the spool attributes are saved in this screen for future test

prints until the InterForm400® menus are left. If you want to repeat the printing of the

report later, the system will suggest the same spool entries as first specified. All you have to do then is to enter your corrections

M WARNING M

It is not possible to export/import definitions for Joint Reports.

264User’s Manual for InterForm400®