Intermate AS/400, i5, iSeries manual File, Qprint, End, Re. Your new MateSert/400 driver

					DISPLAY OUTPUT			FILE
File . .	. .	.	: QPRINT								Page/Line 1/3
Function	. .	.	.								Columns		1 - 78
Search for .		.	.
*...+....	1....	+	....2....	+....	3....	+....	4....	+....	5....	+....	6....	+....	7....	+...

1

Herring Marine Research Seaweed Street 14 9000 Battleaxe DK-Denmark

---------------------

Att: Martin Merman

1004/PH.30-04-97

Re. Your new MateSert/400 driver.

---------------------------------

Congratulations with your new MateSert/400 driver.

You are now able to fully exploit the features of your Inserter in relation to your AS/400 applications. In fact this letter has been printed and inserted by MateSert/400.

The following license code(s) will be needed to activate the driver

	permanently to your AS/400 CPU(s):			END
F3=Exit	F12=Cancel	F19=Left	F20=Right	F24=More keys

In the upper right corner we see that the first print line starts in line 3.

					DISPLAY OUTPUT			FILE
File . .	. .	.	: QPRINT								Page/Line 1/15
Function	. .	.	. +1								Columns		1	- 78
Search for .		.	.
*...+....	1....	+	....2....	+....	3....	+....	4....	+....	5....	+....	6....	+....	7....	+...

Re. Your new MateSert/400 driver.

---------------------------------

Congratulations with your new MateSert/400 driver.

You are now able to fully exploit the features of your Inserter in relation to your AS/400 applications. In fact this letter has been printed and inserted by MateSert/400.

The following license code(s) will be needed to activate the driver permanently to your AS/400 CPU(s):

Model		P-Group	Serial No.	No. of dev.	License Code
-------------------------------------------------------------
F45		-	44A2971	1	81 20 01 3A
320		-	44A9032	3	3F 78 66 99
Should you have any questions regarding the driver, you are welcome
to call our technical support hotline on:
+45	72 26 04 00
Or download the latest documentation from the Internet on:
					END
F3=Exit		F12=Cancel	F19=Left	F20=Right	F24=More keys

Blank lines will not be displayed in a spool file. Therefore we must type +1 in the function field and press Enter until the subject header line (Re. Your new...) Is located just below the ruler. (If you pressed Enter one to many, just correct +1 to -1and press Enter to move in the opposite direction.)

In the upper right corner we now see that the line number for the subject header is 15. The ruler shows us that the text starts in position 8 and ends in position 40.

User’s Manual for InterForm400® 85