Intermate AS/400, i5, iSeries manual Van

Command	Position	Contents	Description
VAN	1 - 2	<&&’	Draws a horizontal line. The line is
	3 - 5	<VAN’	horizontal to the paper rotation,
	6 - 6	sign (+/-) distance to paper top edge	regardless of rotation of the
	7 - 11	distance to top edge INPEL	contents.
	12 - 12	sign (+/-) left end point	IN indicates measurement in
	13 - 17	distance left end point to left paper edge
		INPEL	inches.
	18 - 18	sign (+/-) right end point	PEL indicates measurement in
	19 - 23	distance right end point to left paper edge	Pels.
		INPEL	Leading zeros must be filled in.
	25 - 27	line width PPP (0-31)	If a distance is stated without a
	28 - 28	sign (+/-) move right
	29 - 33	move right INPEL	leading sign the distance is
	34 - 34	sign (+/-) move down	calculated relatively to the paper
	35 - 39	move down INPEL	edge. If a sign (+/-) is stated, the
	41 - 43	number of moves	distance will be calculated
			according to the base line of the
			current line.
			If position 28-43 is filled in, the line
			will be repeated as many times as
			stated in position 41-43.
LOD	1 - 2	<&&’	Draws a vertical line. The line is
	3 - 5	<LOD’	vertical to the paper rotation,
	6 - 6	sign (+/-) distance to top end point	regardless of rotation of the
	7 - 11	distance top end point to top paper edge	contents.
		INPEL	IN indicates measurement in
	12 - 12	sign (+/-) distance to left paper edge
	13 - 17	distance to left paper edge INPEL	inches.
	18 - 18	sign (+/-) bottom end point	PEL indicates measurement in
	19 - 23	distance bottom end point to top paper edge	Pels.
		INPEL	Leading zeros must be filled in.
	25 - 27	line width PPP (0-31)	If a distance is stated without a
	28 - 28	sign (+/-) move right
	29 - 33	move right INPEL	leading sign the distance is
	34 - 34	sign (+/-) move down	calculated relative to the paper
	35 - 39	move down INPEL	edge. If a sign (+/-) is stated, the
	41 - 43	number of moves	distance will be calculated
			according to the base line of the
			current line.
			If position 28-43 is filled in, the line
			will be repeated as many times as
			stated in position 41-43
LIN	1 - 2	<&&’	Draws a line between 2 points. The
	3 - 5	<LIN’	line is oriented to the paper
			rotation, regardless of rotation of
		1. Point	the contents.
	6 - 6	sign (+/-) distance top edge	IN indicates measurement in
	7 - 11	distance to paper top edge INPEL
	12 - 12	sign (+/-) distance left edge	inches.
	13 - 17	distance to left paper edge INPEL	PEL indicates measurement in
			Pels..
	18 - 18	2. Point	Leading zeros must be filled in.
		sign (+/-) distance top edge	If a distance is stated without a
	19 - 23	distance to paper top edge INPEL
	24 - 24	sign (+/-) distance left edge	leading sign the distance is
	25 - 29	distance to left paper edge INPEL	calculated relatively to the paper
			edge. If a sign (+/-) is stated, the
	31 - 33	line width PPP (0-31)	distance will be calculated
	35 - 35	round/sharp ends (R S)	according to the base line of the
	36 - 36	sign (+/-) move right	current print line.
	37 - 41	move right INPEL	If position 36-51 is filled in, the line
	42 - 42	sign (+/-) move down
	43 - 47	move down INPEL	will be repeated as many times as
	49 - 51	number of moves	stated in position 49-51.

User’s Manual for InterForm400® 391