Connections
Fixed RGB analog input (slot 1)
Slot 1 has RGB analog input terminals (BNC) with separate Horizontal and Vertical sync (RGBHV) or with composite sync input (RGBS).
Always use an interface when a computer and local monitor have to be connected to the projector.
Range of interfaces made by BARCO.
Universal analog interface. RGB 120 MHz analog interface. VGA interface
MAC interface
MAGIK interface
Order number : R9826100.
Order number : R9826570.
Order number 120V : R9828079.
Order number 230V : R9828070
Order number 120V : R9828059
Order number 230V : R9828050
Order number 120V : R9828129
Order number 230V : R9828120
|
| Green Operation | Diagnostic Code |
|
| |
|
| Red |
|
|
|
|
Twoway | Hardwired |
|
|
|
|
|
hardwired |
|
|
|
|
| |
remote | remote |
|
|
| OUT | IN |
CTRL 3 | CTRL 2 |
|
|
| ||
|
| Sync OK IR |
|
| On |
|
| Hardwired |
|
|
|
| |
| remote | RS232/422IN | RS232/422OUT | COMM PO RT | TRIGGER OUT |
|
| CTRL 1 |
|
|
|
|
|
R | G | B | H / C | V | R | G | B | H / C | V |
On |
|
|
|
| On |
|
|
|
|
High Bandwidth RGBANALOGINPUT |
|
| HighBandwidth 5CABLE INPUT |
| |||||
9840110 | OUT | IN | 9840110 |
On |
|
R | G | B | H/ C | V | 27910 |
On |
|
|
|
| |
|
|
|
|
| 98 |
RGB analog input : 5 x BNC Red : 0.7 Vpp ± 3 dB Blue : 0.7 Vpp ± 3 dB Green : 0.7 Vpp ± 3 dB
Vert. sync : 1 Vpp to 4 Vpp ± 3 dB Hor. sync / Composite sync :
1 Vpp to 4 Vpp ± 3 dB
All input signals are always 75 ohm terminated, even in the "not selected" mode.
How to select input Slot 1
Key in 1 on the RCU or the local keypad.
Sync selection can be done on the 'Input slots' menu.
The horizontal sync input can be set as separate sync, as separate sync + video or as separate sync
How to change the input slot setting
To change the input slot setting, handle as follow :
1.Press ADJUST or ENTER key to start up the Adjustment mode.
2 Push the cursor key or to select Installation (menu1)
3Press ENTER.
4Press the cursor key or to select 'Input Slots' (menu 2)
5Press ENTER. The internal system will scan the inputs and displays the result in the 'Input Slots' menu.
6 Push the cursor key or to select the first slot (menu 3).
7 Press ENTER key to toggle the input signal priority.
ADJUSTMENT MODE
Select a path from below :
RANDOM ACCESS
INSTALLATION
SERVICE
Select with or
then <ENTER>
<EXIT> to return.
INSTALLATION
INPUT SLOTS
800PERIPHERAL CONFIGURATION
OSD COLOR
INTERNAL PATTERNS
NO SIGNAL
LENS
Select with or <ENTER> to toggle <EXIT> to return.
INPUT SLOTS
Slot Module type [Config]
1.
2.
3.Video [Video]
4.Component Video
5.SDI
6.SDI
Select with or <ENTER> to toggle <EXIT> to return.
menu1 | menu2 | menu3 |
5976072 BARCOELM R12 05052000 |
| |
|
