Service Mode
Available settings.
STATUS [ON/OFF]
ON : BARCO logo will be displayed on the screen.
OFF : No BARCO logo displayed on the screen.
BACKGROUND [ON/OFF]
ON : BARCO logo will be displayed on a black background.
OFF : BARCO logo will be displayed without any background.
SHIFT
By pushing the control disc up, down, to the left or to the right, the BARCO logo can be positioned anywhere on the screen.
HOT KEY [TEXT/OFF]
OFF : no key on the RCU is used to display the BARCO logo.
TEXT : the TEXT key on the RCU is used to display or to remove the BARCO logo with one single push on this key (only in
operational : mode).
Preset Input Balance
Warning
Changing these settings may seriously affect the performance of the projector.
How to start up ?
1Push the cursor key or to highlight 'Preset Input Balance' (menu 1).
2 Press ENTER to select.
When Preset Input Balance is selected in the Service Mode selection menu, the following warning will be displayed :
Preset Input Balance is reserved to qualified service personnel.
If you are not qualified, press EXIT to cancel the preset input balance.
SERVICE
BARCO LOGO
RESET INPUT BALANCE
I2C DIAGNOSIS
MORE...
Select with or
then <ENTER> <EXIT> to return.
menu1
WARNING
PRESET INPUT BALANCE
is reserved to
qualified
service personnel
<ENTER> to accept
<EXIT> to return.
menu2
How to get add ins ?
The available
Available Add Ins.
Light Sensor : When activated, the lamp option ‘Constant light output’ in the menu ‘Lamp’ becomes available.
| 5976072 BARCOELM R12 05052000 | |
|
