Installation Mode
Component video | Component Video - SS : component video with separate sync |
| Component Video - SOY : component video with sync on Y |
| Component Video - 3LSS : component video with 3 level separate sync. |
| Component Video - 3LSOY : component video with 3 level sync on Y. |
RGB analog with |
|
|
For slot 1 and slot 2, see chapter 'Connections'
What if a switcher is connected to the projector ?
If a RCVDS (switched on) or VS05 is connected to the projector, it will be also indicated on the menu by adding +800 peripheral. If no 800 peripheral indication is made on the menu, there are still two possibilities :
-no RCVDS or VS05 connected or
-RCVDS is switched off.
When a 800 peripheral is connected to the projector, the input slots are not accessible with the cursor disc to toggle their function.
800 Peripheral
What can be installed ?
-The type of output module in a RCVDS05.
-The type of communication protocol.
Defining the Output module of the RCVDS05.
When a RCVDS05 is connected to the projector, the type of output module of this RCVDS05 has to be defined in the 800 peripheral menu.
The type of output module can be :
-standard output module or
-5 cable output module. To define the output module :
1 Push the cursor key or to highlight '800 Peripheral' (menu 1). 2 Press ENTER to select.
3 Push the cursor key or to highlight 'Output module' (menu 2). 4 Press ENTER to toggle between 'Standard' or
INSTALLATION
INPUT SLOTS
800PERIPHERAL CONFIGURATION
OSD COLOR
INTERNAL PATTERNS
NO SIGNAL
LENS
QUICK ACCESS KEYS
MENU POSITION [DEFAULT] Select with or
then <ENTER>
<EXIT> to return.
menu 1
800 PERIPHERAL
OUTPUT MODULE [STANDARD
] INFRARED [PPM]
Select with or <ENTER> to toggle <EXIT> to return.
menu 2
Defining the Infrared Communication protocol
When a peripheral is connected to the 'Comm Port', the communication can be in PPM or RC5. The type of communication can be set to :
-PPM
-RC5
To define the communication :
1Push the cursor key or to highlight '800 Peripheral' (menu 1).
2 Press ENTER to select.
3 Push the cursor key or to highlight 'Infrared'. 4 Press ENTER to toggle between [PPM] or [RC5].
INSTALLATION
INPUT SLOTS
800PERIPHERAL CONFIGURATION
OSD COLOR
INTERNAL PATTERNS
NO SIGNAL
LENS
QUICK ACCESS KEYS
MENU POSITION [DEFAULT] Select with or
then <ENTER>
<EXIT> to return.
menu 1
800 PERIPHERAL
OUTPUT MODULE [STANDARD] INFRARED [PPM]
Select with or <ENTER> to toggle <EXIT> to return.
menu 2
| 5976072 BARCOELM R12 05052000 | |
|
