Random Access Adjustment Mode

Size

What can be done ?

The size can be adjusted in a vertical or horizontal way. When adjusting the vertical size,

The upper side of the image is fixed (table and ceiling mounted configurations) and only the lower side can be moved to its exact position.

When adjusting the horizontal size, the left side of the image is fixed and only the right side can be moved to its exact position.

To start up the size adjustment :

1Push the cursor key or to highlight 'Size' (menu 1).

2 Press ENTER to select.

3 Push the cursor key or to size the image in a vertical direction. Push the cursor key or to size the image in a horizontal direction.

GEOMETRY

SHIFT

SIZE

SIDE KEYSTONE

BLANKING

ASPEC RATIO [4:3]

OPTIONS

Select with

or

then <ENTER>

<EXIT> to

return.

menu1

Fixed sides

Horizontal size

adjustment

Vertical size adjustment

Example for table mount configuration

Side Keystone

What can be done ?

The side keystone adjustment is used to align the image if the projector is mounted at a nonstandard projection angle.

Aligning the keystone

1Push the cursor key or to highlight 'Side Keystone'.

2 Press ENTER to select.

3 Push the cursor key or to adjust the keystone of the image.

When the upper part of the image is wider than the lower part of the image, push the cursor key . The number indication below the bar scale will be negative.

When the upper part of the image is smaller than the lower part of the image, push the cursor key . The number indication below the bar scale will be positive.

GEOMETRY

SHIFT

SIZE

SIDE KEYSTONE

BLANKING

ASPEC RATIO [4:3]

OPTIONS

Select with or then <ENTER> <EXIT> to return.

menu1

7-14

 

5976072 BARCOELM R12 17012000

 

Page 67
Image 67
Barco R9001490 owner manual To start up the size adjustment, Aligning the keystone