Barco R9001490 owner manual Installation Mode

Table of Contents

How to adjust the input balance ?	7-12
Geometry	7-13
To start up the Geometry functions :	7-13
Which geometry adjustments are possible ?	7-13
How can an adjustment be adjusted ?	7-13
Shift	7-13
What can be done ?	7-13
To start up the shift action :	7-13
Side Keystone	7-14
What can be done ?	7-14
Aligning the keystone	7-14
Size	7-14
What can be done ?	7-14
To start up the size adjustment :	7-14
Blanking	7-15
What can be done ?	7-15
Available Blanking Adjustment	7-15
Adjusting the blanking	7-15
Aspect Ratio	7-16
What can be done?	7-16
Setting Up the Aspect Ratio	7-16
Options	7-16
Which Options are available within the Geometry menu ?	7-16
Changing the Geometry Options	7-16

INSTALLATION MODE	8-1
Installation Mode	8-1
Start Up	8-1
Input Slots	8-1
What can be done ?	8-1
To view or to change the input configuration :	8-1
Possible results for the input slots :	8-1
What if a switcher is connected to the projector ?	8-2
800 Peripheral	8-2
What can be installed ?	8-2
Defining the Output module of the RCVDS05	8-2
Defining the Infrared Communication protocol	8-2
Configuration	8-3
What can be done ?	8-3
Set up the Correct Configuration	8-3
OSD color (On-Screen Display)	8-3
What can be done ?	8-3
How to change this color setting ?	8-3
No Signal	8-3
What will happen	8-3
Changing the Background Color	8-4
Changing the Shutdown Setting	8-4
Changing the Shutdown Time	8-4
Internal Patterns	8-5
What can be done with these internal patterns ?	8-5
How to select an internal pattern ?	8-5
Note :	8-5
Lens Adjustments	8-5
What can be done ?	8-5
Zoom/Focus/Shift/Tilt	8-6
How to Zoom/Focus ?	8-6
How to shift the image ?	8-6
How to tilt the image ?	8-6
Bridge up or down	8-7
Options	8-7
Quick Access Keys	8-7
What can be done ?	8-7
How to get an overview ?	8-7
Menu Position	8-8
What can be done ?	8-8
How to set up?	8-8

i-4 5976072 BARCOELM R12 29082000