Intermate i5, AS/400, iSeries manual Overlay elements

Overlay elements

Up to 9999 overlay elements can be made in one overlay.

1=FRAME

	Seqnbr. Type			Inch.pel		Repetition
	11,0 1	Frame	Top edge	______		Move right	______
			Left edge	______		Move down	______
			Right edge	______		Extra times	___
			Bottom edge	______
			Thickness in pels		___	NW NE SW SE
			Round/Sharp (R S)	_	Radius	__ __ __ __
			Pattern	_	F4=List
	F3=Exit		F11 = delete	F12=Cancel		F18=View Spool entry
Top Edge:		Inches, pels absolute to the upper edge of a portrait page regardless of
		the rotation specified by the global settings for the overlay.
Left Edge:		Inches, pels absolute to the left edge of a portrait page regardless of the
		rotation specified by the global settings for the overlay.
Right Edge:		Inches, pels absolute to the left edge of a portrait page regardless of the
		rotation specified by the global settings for the overlay.

Bottom Edge: Inches, pels absolute to the upper edge of a portrait page regardless of the rotation specified by the global settings for the overlay.

Thickness

in pels: Thickness of a border in pels (1/240"). Zero means no border.

Round/Sharp: Determines whether the corners of the frame will be round or sharp. You can also specify the radius in pels of each of the 4 corners (NorthWest, NorthEast, SouthWest, SouthEast).

	You can mix sharp and round corners by entering a radius in pels for the
	corners you want round, and state zeros for the corners you want sharp.
	If you specify R for round corners without entering radius in any of the 4
	fields, the system will use the default value of 24 as radius for all 4
	corners.
	Unfortunately HPII, HPIID, HPIIP and other PCL4 printers can not draw
	round corners. On those printers corners will always be sharp.
Pattern:	Defines a fill pattern for the frame. Left blank means no pattern. Refer to
	page 59 on how to use patterns.
Repetition
Move right:	Inch,pels of the right movement of a duplicate of the frame relative to
	the value for left edge
Move Down:	Inch,pels of the vertical movement of a duplicate of the frame relative to
	the value for Top edge
Extra times:	Extra copies of the frame excluding the original. Extra copies will be
	displaced relative to each other according to the settings of Move right
	and Move Down.

54User’s Manual for InterForm400®