Intermate AS/400 Placement of optical marks, Print Sequence, Pages in reverse, Reverse order per

Placement of optical marks:

Refer to the documentation of your insertion system for further information on the optical marks.

Rotation:The available values for rotation are: 000, 090, 180, 270 degrees.

From top edge: Absolute margin from top edge of the page dissolved in inches and pels (see Measuring formats page 48).

From left edge: Absolute margin from the left edge of the page dissolved in inches and pels (see Measuring formats page 48). Note that this value will be added to the left margin value of the overlay command type 8. Tabulator.

Print Sequence:

This option defines the order which the pages should be output from InterForm400®:

Normal: The output order matches the input order.

Pages in reverse

order: The output order of the entire print job is reversed.

Reverse order per

recipient: The output order is only inversed within the same recipient according to the level break conditions.

Press Enter to continue defining the Pitney Bowes pre-processing:

Update Finish Definition PRS310D

Inserting equipment . . . : Pitney Bowes

Max. pages per envelope	. . ___
What to do if more than max
pages to a recipient . . . . _		1=Outsorting
		2=More than 1 envelope
Can there be code for out-
sorting in the printout	. . _	1=Yes 2=No
If YES to the above
Line number . . . .	. . ___
Position	. . ___
Value	. . _

F3=Exit F12=Cancel

Max. pages per envelope: This indicates the maximum pages to be inserted into an envelope. InterForm400® will insert a “close envelope” command at this point.

User’s Manual for InterForm400® 193