text. The purpose of the text is primarily to ease the management for users with access to more than one file.

The Printer Class specifies the type of printers, which this file set should include overlays for. Depending on this selection, the menus and available functions will change throughout the program. Note that screen shots in this manual correspond to a selection of 1=Black/White.

Note: When choosing printer class 1 instead of 2, you are restricting the overlay definitions in this file set from using any colour resources e.g. colour images and selecting colours with the INK lines. Printer class 3 are used for file sets for Label printers e.g. Zebra printes.

Only if you answer Y to duplex, screens related to design of overlays will include queries about duplex (e.g. back page overlay).

6. Connect Users with Overlay File Sets

The system may contain any number of file sets. With this option you can specify which file sets the individual users may operate on.

The program starts with the following screen:

Connect users with overlay and report file sets

A user can be connected with one or more specific file sets

Several users may be connected with the same file set.

User profile __________

F3=Exit

F4=List InterForm users

F12=Cancel

 

 

 

Enter the user profile of the user in question, and you will get this screen:

274User’s Manual for InterForm400®

Page 274
Image 274
Intermate AS/400, i5, iSeries manual Connect Users with Overlay File Sets