Intermate AS/400, i5, iSeries manual We now proceed by entering type 5 for Text, 120, 7001

We now proceed by entering type 5 for Text:

Seqnbr. Type		Inch.pel
3,1 5	Text constant From top edge	_2,120
	From left	_1,120
	Rotation	000
	Font	7001	F4=List
	Text	COPY_______________________________

______________________________________________________________________________

_____________________________

F3=Exit F4=Prompt F12=Cancel

We place the text approximately in the middle of the address field. If you want to tilt the copy watermark you can define a rotation of 030, 120, 210 or 300 degrees.

For the font out line we can prompt the font list with F4. The largest font currently assigned to the system is font ID 2103 with point size 24 (see font list on page 383).

We can now choose to use this font, or we can assign a new font ID a larger font.

If you feel comfortable enough with InterForm400® by now, you should try to assign the large font, Go to 80. Administration Menu (either in this session by exiting with F3, or by using another session). Go to section 7. Work with fonts and select 1.Description of additional fonts. Now perform the steps described in the Example of defining a resident Printer Font on page 281).

Afterwards we re-enter sequence line 4 in our overlay MYDEMO.

If you have chosen for now to use the existing 24 point font you should enter font ID 2103.

If you used the example on page 281 to create a 70 point font, you should enter font ID 7001.

The text is of course COPY.

We press Enter to save sequence line 4.

100User’s Manual for InterForm400®