Intermate iSeries, i5, AS/400 manual =Merge with Overlay, Merge overprint, Find overlay

1=Merge with Overlay

Update AFC-functions attached to output queues			AFC305D
Output queue . . . . :	PRTHP3_AFC
Library . . . . . :	QUSRSYS
Seqnbr Funct Form type	Save Jobname	Filename Device file	Program

Seqnbr Function
1,0	1	Merge with overlay
		Output queue for merged print . __________
		Library		__________
		InterForm 400 printer type . . . __________
		Interface		__________
		Merge overprint lines		*NO_	*NO,*YES
		Find overlay in forms type table		N	(Y N)
F3=Exit		F13=Fold/Unfold	F11=Delete	F12=Cancel

In this screen the specifications for the output device is entered:

Output queue/

library:The queue to receive the resulting print out. If a specific queue, Printer type and Interface type has been defined in the previous screen, the keyword *DEFAULT will be preset for this field. This is overwritten when entering a queue and a library here. Note that the keyword *DEFAULT apply to both Output queue, library, InterForm400® printer type and Interface.

Printer Type/

Interface:The printer type (refer to page 374) and protocol conversion (refer to page 378) used for the above printer. Note that the keyword *DEFAULT entered for output queue will apply for these settings as well, i.e. the settings for Printer type and Interface type from the previous screen will be used.

Merge overprint

lines:Specifies, that overprinted lines will be printed as one line. Refer to page 118 for more information.

Find overlay in

forms type table: Stating Y will cause the Forms type table to be used for the form type stated for this entry. See page 170 for information on how to use the Forms type table. If stating N you will get the below screen.

In the following screen the definitions for the overlay is entered:

140User’s Manual for InterForm400®