Intermate AS/400 Grouping and ungrouping elements, You can ungroup the elements in these manners

Grouping and ungrouping elements

You can group several elements in order to reposition them all in one process. Note, that you can only create one, current group. You can group elements together in the following manners:

•By holding down the <Ctrl> key and marking each element in the element listing to the left of the screen.

•By holding down the <Ctrl> key and marking each element in the result window.

•By first making sure, that no element is selected by e.g. clicking in an area in the result window, where no element is found and then holding down a mouse button and dragging a red frame around the elements you want to select. After you have selected elements in this manner you can still hold down the <Ctrl> key and mark additional elements as described above.

While you have grouped several elements you can change the font for all the elements at one time by selecting the common font in the lower left corner of the designer.

You can ungroup the elements in these manners:

•By holding down the <Ctrl> key and clicking on an element you will remove this element from the group.

•By clicking anywhere in the result window (without holding down <Ctrl>) all the elements will be removed from the group.

User’s Manual for InterForm400® 475