Intermate iSeries, i5, AS/400 manual Right margin, Escape, Adjustement, Blank original

Right margin

adjustment: Defines when a text line should not be justified. This is based on the percentage of text characters versus blank spaces left on the last line of a remapped paragraph.(0-100%)

Escape

sequences: Used when working with spool files having escape sequences integrated. (See Appendix H, page 390)

	+	Opens up for Extended Adjustment for definition of
		Underline of text in the Remap Window and/or a line of
		periods (known as punctuation or dot leaders) made after
		the text. following options appear when + is entered:
		Adjustement:		The adjustment of the underlined or
				punctuation lines. Values U, L, C, R or N
				according to the above.
		Underline:		Underlining of text in the Remap Window
		Punctuation		(spaces are not underlined).
		Length: If the last position of the text line in the Remap
			Window, defined by the second Input Position
			field, is a period sign, a line of punctuation will
			be printed. The punctuation will start after the
			last printable character, and end at the position
			(inches,pels) stated in this field counting from
			the position stated in From Left. Only
			Adjustment values U and L can be used. No
			punctuation will be made if other values are
			used, if no period sign is found or if the text
			exceeds the punctuation length.
Font:	The new font of the formatted text.
Blank original	B specifies, that the original text should be removed.
Condition:	An optional set of values used if the remapping should be
	executed on a certain condition.
	Position:		Only activate the Remap Window If the character
			string read by the Remap Window matches this
			character string according to the following
			condition:
	Is >=<N		Only run tabulator if this following field contains a
			text string or a number which match one of the
			following valid operators:
			>	Greater than a number entered in the
				following field.
			=	Equal to a number or a text string (case
				sensitive) or a number entered in the
				following field.
			<	Less than a number entered in the
				following field.
			N	Not equal to a number or a text string
				(case sensitive) or a number entered in
				the following field.
			A	Acceptable characters. All the
				characters in marked interval must be
				one of the characters in the following

User’s Manual for InterForm400® 65