Intermate iSeries, i5, AS/400 manual Just after the last detail line, Foot

Work with reformat definitionRFM300D

Definition name . . . . . : DEMO_REFOR

Description . . . . . . . : Reformat the Demo spooled file

Placing of totals

Select one of the following options:

1.Just after the last detail line

2.Like 1, if there is space for all total lines, otherwise next page.

3.In foot

Option _

F3=Exit F12=Cancel

On this screen you can decide how the total should be inserted:

1. Just after the last detail line

This choice will insert the totals just after the last detail line. If there is no room for all lines for the total, then the rest is inserted on the next page.

2. Like 1, if there is space for all total lines, otherwise next page.

This works like a 'block protect'. Transfers all the total lines onto the next page if necessary.

3. In foot

Prints the totals in the footer.

Press Enter to proceed to this screen:

Work with		reformat definition	RFM300D
Definition name . . . . . : DEMO_REFOR
Description	. . . . . . . : Reformat the Demo spooled file
Extra total	page

Extra total page is created, if number of output detail lines on the last page is above a certain limit

Limit detail lines if last page is page 1 . . . . __0

Limit detail lines if last page is >1 . . . . . . __0

Total line-ID

If only 1 total page . . . . . . ____

If 2 total pages, first total . . ____

If 2 total pages, extra total . . ____

F3=Exit F12=Cancel

The header may be larger on page 1 for each document, so there might room for fewer detail lines on the first page than on the subsequent pages. You state here the number of detail lines that there are room for.

You can also state various line-ID's depending on if the total is spread across two pages or not:

User’s Manual for InterForm400® 227