Intermate iSeries, i5, AS/400 manual Bla

Command	Position	Contents			Description
BLA	1 - 2	<&&’			(BLA = Block attributes)
	3 - 5	<BLA’			Sets the attributes for any
	6 - 6	sign (+/-) distance top edge			preceding block-commands (See
	7 - 11	distance to paper top edge INPEL			BLO). These attributes will be used
	12 - 12	sign (+/-) distance left edge			for any BLO-commands until
	13 - 17	distance to left paper edge			another BLA is issued.
	19 - 21	rotation
	23 - 26	font
	28-32	Maximum line width of lines in the block
		INPEL	when being printed.
	34-36	Spacing between lines ( PEL)
	38-40	Percentage of line width to cause right-
		margin-adjustment.If printing a line in the
		block (using normal spacing) would exceed
		this percentage (of the block width), spaces
		between words will be increased in size to
		cause the line of text to occupy the entire
		line.
	42-44	Escape sequence 01			Escape sequences and functions
	45-48	Escape function 01			are used together. Sequence 01
	50-52	Escape sequence 02			are used in conjunction with
	53-56	Escape function 02			function 01 and so on.
	58-60	Escape sequence 03
	61-64	Escape function 03
	66-68	Escape sequence 04
	69-72	Escape function 04
	74-76	Escape sequence 05
	77-80	Escape function 05
	82-84	Escape sequence 06
	85-88	Escape function 06
	90-92	Escape sequence 07
	93-96	Escape function 07
	98-100	Escape sequence 08
	101-104	Escape function 08
	106-108	Escape sequence 09
	109-112	Escape function 09
	114-116	Escape sequence 10
	117-120	Escape function 10
	122-124	Escape sequence 11
	125-128	Escape function 11
		Escape function 1-11 defines the function			Escape sequence 1-11 defines
					the allowed escape sequences in
		of an escape sequenc. The following
					the text of the &&BLO-commands.
		functions are supported
					An escape sequence can consist of
		Function Description			1 to 3 characters.
		UL	Start underlining text.
		ENUL	End underlining text.
		-	Syllable hyphen. A '-' is	inserted
			only if a part of the word (the part
			before syllable hyphen) can fit the
			line width. Then the rest of the
		word are moved to the next line.
		NL	New line forces the following text
		to	begin at the next line.
		HLUP	Half line up/superscript.
		HLDW	Half line down/subscript.
		ENHL	End half line up/down
		NORM	End underlining, ends half line
			up/down and set font to font
			specified in the &&BLA command
			(font number) Change to APF-font
			number.
BLO	1 - 2	<&&’			BLO = Block
	3 - 5	<BLO’			Adds a line of text to the block
	7 - 198	Text to be printed (incl. any esc. sequences)			The line of text will be included with
					other &&BLO-commands and
					wrapped to fit the line width
					specified in the &&BLA-command.
					A &&BLA-command must proceed
					any %%BLO command.

User’s Manual for InterForm400® 395