Intermate i5, AS/400, iSeries Work with X-axis points, Seq number, Axis point ID, Text font/color

Work with X-axis points

You can assign X-axis points to an existing X-axis group, by using option 12=Work with X-axis points in front of the group as described above.

In the example above, where we have created a group called Month, we might add 12 X- axis points for that group, marking the 12 months of the year.

Work with X-axis points CHX200D

Chart . . . . . . . . . : SAMPLELINE

Type . . . . . . . . . . : *LINE

X-axis group ID . . . . : G1

Type options, press Enter.

2=Change 3=Copy 4=Delete 5=Display 7=Assign new seq nbr to X-axis point

Opt Seq number ID Text Spc

(No X-axis points to display)

End

F3=Exit F5=Refresh F6=Create F12=Cancel

If you press F6=Create to create a new X-axis point the following is displayed:

Create X-axis group		CHX110D
Chart	:	MYBAR
Type	:	*BAR
Seq number	.	__1
X-axis group ID		__A
Text	.	Jan.____________________________________________
Text font	.	__11
Text font color		__1
Relative spacing . . . .	.	_60

	F3=Exit F4=Prompt	F12=Cancel
Seq number:		Sequence number which decides the order of the axis
		points.
X-axis point ID:		ID of the X-axis point for this specific X-axis group.
		This ID must be unique i.e. no other X-axis point can
		have the same ID – not even in other X-axis groups.
Text:		Text below the chart to mark this point.
Text font/color:		Font and color of the text.
Relative spacing:		Specifies the spacing in pels between the bars (only used for
		bar charts).

User’s Manual for InterForm400® 441