Intermate i5, AS/400, iSeries manual Merge Spool Entry with Overlay, APF730D

3. Merge Spool Entry with Overlay

With option 3 on the main menu you are able to create a printout in which a spool-entry is merged with an overlay and placed in the default output queue for your session.

Merge Spooled File with Overlay			APF730D
Overlay name	__________
or Overlay Selector	________
Primary/Secondary set _		1=Primary 2=Secondary
Spooled file:
Job name	__________
User	__________
Job number	______
File name	__________
Spool file no.	______	Number, *ONLY, *LAST
Code page	______	Number, *INPUT
Merge overprint lines	*NO_	*NO, *YES
Form type	A4______
Copies	_1	(1-255)
Drawer / Papertype	*PRINTER	(*PRINTER, *INPUT, *OVERLAY, 1-256, Name)
Labels / Continuous	1	1 = Seperate labels	2 = Continuous
Media type	1	1=Termo transfer 2=Termo media
Print mode	1	1=Tear off 2=Rewind 3=Peel off 4=Cutter
Name of output queue to search if spooled file is unknown:
Output queue	__________
Library	__________
F3=Exit	F4=Prompt		F12=Cancel

Overlay Name : Name of an overlay in the file-set you have open. F4 will prompt for overlay names.

Primary/

Secondary Set: If you have defined Copy Management for the overlay (see page 53 and 46) you can test if you have made the correct selection of overlay elements, by printing the overlay elements for one of the two sets only. If this field is left blank (default) the system will as default pick the Primary set.

Overlay Selector: If you have defined an Overlay Selector you can test if it is able to pick the correct overlay. In this case Overlay Name above must be blank. (refer to section Working with Overlay selectors page 122)

Spooled File: Spooled file attributes can be entered here.

There is an alternative to typing all the information manually. If you type the name of an output queue in the bottom of the screen and press Enter, you can retrieve the information about the spool entry from a view of the selected output queue by selecting with option 1:

User’s Manual for InterForm400® 117